192.168.2.1 is the default IP address for some home network routers. Such as, Belkin, Edimax, Siemens and SMC routers. This IP address has been set to the default address of the router in the factory, but it can be changed later. Any router or computer in the local network can also use it. In order to set up routers, all routers have a default IP address. You can use it to connect to the router's administrative console and configure its settings. Most of the router's wizard interface can guide you to install, which is very simple. However, if you have problems installing routers, or if you want to set up some advanced configuration, you may need to access the router's console. How to log in the IP address 192.168.2.1 If your router uses the default IP address 192.168.2.1, you can log in to the router by entering this IP into the web browser's address bar. http://192.168.2.1. If the connection is successful, the router will prompt you to enter your username and password. This username and password have been set up at the time of leaving the factory. When you start using it, you should change it to more secure content. The following is the most common default login data. Belkin router username: "admin", "Admin" or blank password: "admin", "password" or blank Edimax router username: "admin", "root" or blank password: "admin", "password", "1234", "epicrouter", "root", "conexant" or blank Siemens router username: "admin" or blank password: "admin", "user" or blank SMC router username: "admin", "smc", "smcadmin", "cusadmin" or blank password: "smcadmin", "root", "barricade", "password", "highspeed"…